Greenplum安装：修订间差异

来自牛奶河Wiki
跳到导航 跳到搜索
无编辑摘要
无编辑摘要
 
（未显示同一用户的2个中间版本）
第1行： 第1行：
Greenplum 安装、配置
== INIT ==
== INIT ==


第147行： 第149行：
  export LD_LIBRARY_PATH=$GPHOME/lib
  export LD_LIBRARY_PATH=$GPHOME/lib
  export MASTER_DATA_DIRECTORY=/u01/gpdb/master/gpseg-1
  export MASTER_DATA_DIRECTORY=/u01/gpdb/master/gpseg-1
===Installing Greenplum Database===
 
== Installing Greenplum Database ==
  # wget http://10.10.137.16/soft/linux/greenplum/open-source-greenplum-db-6.22.0-rhel7-x86_64.rpm
  # wget http://10.10.137.16/soft/linux/greenplum/open-source-greenplum-db-6.22.0-rhel7-x86_64.rpm
  # sudo yum install open…
  # sudo yum install open…
第232行： 第235行：
  # master 节点pg_hba.conf修改后，standby节点也需要同步修改。目标目录不能存在
  # master 节点pg_hba.conf修改后，standby节点也需要同步修改。目标目录不能存在
  gpinitstandby -s n09 -S /u01/gpdb/standby/gpseg-1 [-P 5432]
  gpinitstandby -s n09 -S /u01/gpdb/standby/gpseg-1 [-P 5432]
===Check===
 
== Check ==
  # Check 在primary上执行，测试所有主机读写，-r (d)磁盘IO swim——时间较长，没必要做
  # Check 在primary上执行，测试所有主机读写，-r (d)磁盘IO swim——时间较长，没必要做
  # 会在指定目录下建立 gpcheckperf_gpadmin 目录，写入 ddfile
  # 会在指定目录下建立 gpcheckperf_gpadmin 目录，写入 ddfile
第290行： 第294行：
[[分类:Develop]]
[[分类:Develop]]
[[分类:DB]]
[[分类:DB]]
[[分类:Greenplum]]

2022年12月29日 (四) 16:17的最新版本

Greenplum 安装、配置

INIT

Check

 ./rrun ip_gp 'sestatus'
 ./rrun ip_gp 'cat /etc/
 ./rrun ip_gp 'systemctl
 ./rrun ip_gp 'hostname'

sestatus

 SELinux status: disabled
 Disabling SELinux and Firewall Software

 SELinux 临时关闭（不一定管用，P.S. 根本不管用。SELinux只能重启;好像管用）
 setenforce 0

 vi /etc/selinux/config
 SELINUX=disabled

firewalld

 systemctl status firewalld
 systemctl stop firewalld
 systemctl disable firewalld

Set the required operating system parameters

  The hosts File

The sysctl.conf File

 Set the parameters in the /etc/sysctl.conf file and reload with sysctl -p
 echo $(expr $(getconf _PHYS_PAGES) / 2) 
 echo $(expr $(getconf _PHYS_PAGES) / 2 \* $(getconf PAGE_SIZE))
 kernel.shmall = _PHYS_PAGES / 2 # See Shared Memory Pages
 kernel.shmmax = kernel.shmall * PAGE_SIZE 

 vm.overcommit_memory = 2 # See Segment Host Memory
 vm.overcommit_ratio = 80 # See Segment Host Memory

>= 64G

 vm.dirty_background_ratio = 0 # See System Memory
 vm.dirty_ratio = 0
 vm.dirty_background_bytes = 1610612736 ＃1.5GB
 vm.dirty_bytes = 4294967296 ＃4GB

< 64G

 vm.dirty_background_ratio = 3
 vm.dirty_ratio = 10

20210916, Adam, Greenplum 6.17

  • shmall, shmmax 根据内存调整
    • 64G=8172895,67456868352
  • 256G=32920550,134842572800
  • sysctl设置不正确，会造成部分节点生成不成功 # 2022/6/15

sysctl.conf

 kernel.shmall = 32920550
 kernel.shmmax = 134842572800
 kernel.shmmni = 4096
 vm.overcommit_memory = 2
 vm.overcommit_ratio = 80
 net.ipv4.ip_local_port_range = 10000 65535
 kernel.sem = 500 2048000 200 4096
 kernel.sysrq = 1
 kernel.core_uses_pid = 1
 kernel.msgmnb = 65536
 kernel.msgmax = 65536
 kernel.msgmni = 2048
 net.ipv4.tcp_syncookies = 1
 net.ipv4.conf.default.accept_source_route = 0
 net.ipv4.tcp_max_syn_backlog = 4096
 net.ipv4.conf.all.arp_filter = 1
 net.core.netdev_max_backlog = 10000
 net.core.rmem_max = 2097152
 net.core.wmem_max = 2097152
 vm.swappiness = 10
 vm.zone_reclaim_mode = 0
 vm.dirty_expire_centisecs = 500
 vm.dirty_writeback_centisecs = 100
 vm.dirty_background_ratio = 0
 vm.dirty_ratio = 0
 vm.dirty_background_bytes = 1610612736
 vm.dirty_bytes = 4294967296

System Resources Limits

  1. soft表示软限制；hard表示硬限制；nproc进程数；nofile文件数
  2. Set the following parameters in the /etc/security/limits.conf file:
  3. vi /etc/security/limits.d/20-nproc.conf

20210916, Adam, Greenplum 6.17

  • soft nofile 524288
  • hard nofile 524288
  • soft nproc 131072
  • hard nproc 131072


./lrun ip_gp 'scp gp/sysctl.conf %VAR%:/etc/.'

./rrun ip_gp 'sysctl -p'

./lrun ip_gp 'scp gp/20-nproc.conf %VAR%:/etc/security/limits.d/20-nproc.conf'

Disk I/O Settings

 ./rrun ip_gp '/sbin/blockdev --setra 16384 /dev/sda
 # /sbin/blockdev --getra /dev/sda
 DEV=/dev/mapper/centos-home
 DEV=/dev/sdb
 IP=10.10.139.12
 ssh $IP "/sbin/blockdev --setra 16384 ${DEV}"
 ssh $IP "/sbin/blockdev --getra ${DEV}"

 vi /etc/rc.d/rc.local
 ulimit -SHn 131072

Disk I/O scheduler

  1. CentOS 7.x默认支持的就是deadline算法
  2. CentOS 6.x下默认支持的cfq算法，而一般我们会在SSD固态盘硬盘环境中使用noop算法
  3. echo deadline > /sys/block/sda/queue/scheduler
  4. 永久生效的方法 CentOS 7.x
  5. grubby --update-kernel=ALL --args="elevator=deadline"
echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo never > /sys/kernel/mm/transparent_hugepage/defrag

Transparent Huge Pages (THP) 在上面 Disk I/O

# cat /sys/kernel/mm/transparent_hugepage/enabled
# echo never > /sys/kernel/mm/transparent_hugepage/enabled
always [never]
always madvise [never]

IPC Object Removal

Disable RemoveIPC. Set this parameter in /etc/systemd/logind.conf on the Greenplum Database host systems.
RemoveIPC=no
# service systemd-logind restart
# systemctl restart systemd-logind

SSH Connection Threshold

# vi /etc/ssh/sshd_config
#MaxStartups 10:30:100
#MaxSessions 10
#20210916, Adam, Greenplum 6.17
MaxStartups 10:30:200
MaxSessions 200
# systemctl restart sshd

Synchronizing System Clocks

XFS Mount Options

XFS is the preferred data storage file system on Linux platforms. Use the mount command with the following  recommended XFS mount options for RHEL and CentOS systems:
rw,nodev,noatime,nobarrier,inode64

Creating the Greenplum Administrative User

# groupadd gpadmin
# useradd gpadmin -u 2200 -r -m -g gpadmin
# passwd gpadmin    #Bigp.28
# groupadd gpadmin;useradd gpadmin -u 2200 -r -m -g gpadmin;passwd gpadmin

run visudo and uncomment the %wheel group entry

%wheel        ALL=(ALL)       NOPASSWD: ALL
Make sure you uncomment the line that has the NOPASSWD keyword.
Add the gpadmin user to the wheel group with this command.
# usermod -aG wheel gpadmin

./rrun ip_gp 'mkdir /u01/gpdb/;chown gpadmin:gpadmin -R /u01/gpdb'

.bash_profile

#20220927, Adam, Greenplum 6.22
export GPHOME=/usr/local/greenplum-db
export PATH=$GPHOME/bin:$PATH
export LD_LIBRARY_PATH=$GPHOME/lib
export MASTER_DATA_DIRECTORY=/u01/gpdb/master/gpseg-1

Installing Greenplum Database

# wget http://10.10.137.16/soft/linux/greenplum/open-source-greenplum-db-6.22.0-rhel7-x86_64.rpm
# sudo yum install open…
# sudo chown -R gpadmin:gpadmin /usr/local/greenplum*

## batch
./rrun ip_owgp 'cd /tmp;yum -y install open….rpm;chown -R gpadmin:gpadmin /usr/local/greenplum*'

./rrun ip_gp 'wget http://10.10.137.16/soft/linux/greenplum/open-source-greenplum-db-6.22.0-rhel7-x86_64.rpm; yum -y  install open-source-greenplum-db-6.22.0-rhel7-x86_64.rpm;chown -R gpadmin:gpadmin /usr/local/greenplum-db*'


# 在一台主机上(一般为管理主机）ssh-keygen，然后设定可以ssh所有机器
ssh-keygen

## Enabling Passwordless SSH

# 主机互信（在可以ssh所有主机的机器上执行）
# hostfile_exkeys
owgpp
owgpm
owgpd3
owgpd4

# 环境变量
source /usr/local/greenplum-db/greenplum_path.sh

gpssh-exkeys -f hostfile_exkeys


./rrun ip_gp 'mkdir /home/gpadmin/.ssh;chown -R gpadmin:gpadmin /home/gpadmin/.ssh'
./lrun ip_gp 'scp gp/grant/* %VAR%:/home/gpadmin/.ssh/'
./rrun ip_gp 'chown -R gpadmin:gpadmin /home/gpadmin/.ssh/'
./lrun ip_gp 'scp gp/grant/known_hosts %VAR%:/home/gpadmin/.ssh/'
./rrun ip_gp 'chown -R gpadmin:gpadmin /home/gpadmin/.ssh/'

建立数据库目录

# /u01
#    gpdb/master
#        /primary
#        /mirror
./rrun ip_gp_137 'mkdir -p /u01/gpdb;cd /u01/gpdb;mkdir master primary mirror;chown gpadmin:gpadmin -R /u01/gpdb'

在primary上执行

# Creating the Greenplum Database Configuration File
mkdir /home/gpadmin/gpconfigs/
cp $GPHOME/docs/cli_help/gpconfigs/gpinitsystem_config /home/gpadmin/gpconfigs/gpinitsystem_config
cd /home/gpadmin/gpconfigs/
# vi gpinitsystem_config 
ARRAY_NAME="BIGP"
PORT_BASE=21000
declare -a DATA_DIRECTORY=(/u01/gpdb/primary /u01/gpdb/primary /u01/gpdb/primary /u01/gpdb/primary /u01/gpdb/primary  /u01/gpdb/primary /u01/gpdb/primary /u01/gpdb/primary)
MASTER_HOSTNAME=bimd1
MASTER_DIRECTORY=/u01/gpdb/master
# Mirror
MIRROR_PORT_BASE=21100
declare -a MIRROR_DATA_DIRECTORY=(/u01/gpdb/mirror /u01/gpdb/mirror /u01/gpdb/mirror /u01/gpdb/mirror /u01/gpdb/ mirror /u01/gpdb/mirror /u01/gpdb/mirror /u01/gpdb/mirror)
# DB
DATABASE_NAME=cbsgp
MACHINE_LIST_FILE=/home/gpadmin/gpconfigs/hostfile_gpinitsystem

MASTER_MAX_CONNECT=300        # 不易过大，默认250。(256G内存 --> 2000报错，1000 OK)

## Install
# gpinitsystem -c gpconfigs/gpinitsystem_config -h gpconfigs/hostfile_gpinitsystem
# 结果见 gpinitsystem 


# 访问权限
# /u01/gpdb/master/gpseg-1/pg_hba.conf
# pg_hba.conf
host    all    all    10.0.0.0/8  md5

# 设置Greenplum数据库时区
# 需要 gpstop -u
# gpconfig -s TimeZone
# gpconfig -s log_statement
gpconfig -c TimeZone -v 'Asia/Shanghai'
gpconfig -c log_statement -v none -m ddl

# 以上参数生效
gpstop -u



# 建立冗余的master节点
# master 节点pg_hba.conf修改后，standby节点也需要同步修改。目标目录不能存在
gpinitstandby -s n09 -S /u01/gpdb/standby/gpseg-1 [-P 5432]

Check

# Check 在primary上执行，测试所有主机读写，-r (d)磁盘IO swim——时间较长，没必要做
# 会在指定目录下建立 gpcheckperf_gpadmin 目录，写入 ddfile
# -rw-rw-r-- 1 gpadmin gpadmin 488447627264 Mar 22 16:47 ddfile
# gpcheckperf -f hostfile_gpcheckperf -r sM -D -d /u01/gpdb
# 
# gpcheckperf -f hostfile_exkeys -r N -d /tmp
====================
==  RESULT 2020-10-01T17:50:56.683977 (105.*)
====================
Netperf bisection bandwidth test
etlgpp -> etlgpm = 113.340000
etlgpd1 -> etlgpd2 = 112.340000
etlgpm -> etlgpp = 113.340000
etlgpd2 -> etlgpd1 = 112.340000

Summary:
sum = 451.36 MB/sec
min = 112.34 MB/sec
max = 113.34 MB/sec
avg = 112.84 MB/sec
median = 113.34 MB/sec



====================
==  RESULT 2020-09-25T05:40:25.786123 (Oracle Cloud)
====================
Netperf bisection bandwidth test
gpbi-p -> gpbi-m = 489.650000
gpbi-3 -> gpbi-4 = 475.920000
gpbi-m -> gpbi-p = 475.900000
gpbi-4 -> gpbi-3 = 476.110000

Summary:
sum = 1917.58 MB/sec
min = 475.90 MB/sec
max = 489.65 MB/sec
avg = 479.39 MB/sec
median = 476.11 MB/sec

====================
==  RESULT 2020-08-05T13:12:43.987676 (137.*)
====================
Netperf bisection bandwidth test
m01 -> n07 = 106.710000
n08 -> n09 = 112.330000
n07 -> m01 = 91.640000
n09 -> n08 = 112.280000

Summary:
sum = 422.96 MB/sec
min = 91.64 MB/sec
max = 112.33 MB/sec
avg = 105.74 MB/sec
median = 112.28 MB/sec
取自“https://mwbbs.eu.org/wiki/index.php?title=Greenplum安装&oldid=213”