查看“K8s 安装”的源代码

=== 环境准备 ===
* 关闭 selinux 及 firewalld
* 关闭 Swap
==== host ====
 192.168.0.158   np0
 192.168.0.229   np1
 192.168.0.249   np2
 192.168.0.148   np3

==== 设置网桥参数 ====
 cat << EOF > /etc/sysctl.d/99-kubernetes-cri.conf
 net.bridge.bridge-nf-call-ip6tables = 1
 net.bridge.bridge-nf-call-iptables = 1
 net.ipv4.ip_forward = 1
 user.max_user_namespaces=28633
 EOF
 
 sysctl -p /etc/sysctl.d/99-kubernetes-cri.conf

==== 配置支持 IPVS ====
加载 ip_vs 内核模块。kube-proxy 通过采用 iptables + ipset + ipvs 的方式实现为符合条件的 Pod 提供负载均衡。否则 kube-proxy 会退回到 iptables 模式。
 cat > /etc/modules-load.d/ip_vs.conf << EOF 
 ip_vs
 ip_vs_rr
 ip_vs_wrr
 ip_vs_sh
 nf_conntrack_ipv4
 EOF

 modprobe ip_vs
 modprobe ip_vs_rr
 modprobe ip_vs_wrr
 modprobe ip_vs_sh
 modprobe nf_conntrack_ipv4

==== 导入模块 ====
 cat << EOF > /etc/modules-load.d/containerd.conf
 overlay
 br_netfilter
 EOF

 modprobe overlay
 modprobe br_netfilter

 lsmod | grep overlay
 lsmod | grep br_netfilter

=== 部署 Containerd ===
==== 创建容器工具 ====
 wget https://github.com/opencontainers/runc/releases/download/v1.1.4/runc.amd64
 install -m 755 runc.amd64 /usr/local/sbin/runc

==== 容器间网络通信 ====
 wget https://github.com/containernetworking/plugins/releases/download/v1.2.0/cni-plugins-linux-amd64-v1.2.0.tgz
 mkdir -p /opt/cni/bin
 tar Cxzvf /opt/cni/bin cni-plugins-linux-amd64-v1.2.0.tgz

==== Containerd ====
 wget https://github.com/containerd/containerd/releases/download/v1.7.14/containerd-1.7.14-linux-amd64.tar.gz
 tar Cxzvf /usr/local containerd-1.7.14-linux-amd64.tar.gz
 
 wget https://raw.githubusercontent.com/containerd/containerd/main/containerd.service -o /usr/lib/systemd/system/containerd.service
 systemctl daemon-reload && systemctl enable containerd

 mkdir /etc/containerd
 containerd config default > /etc/containerd/config.toml

 cd /etc/containerd/
 cp config.toml config.toml.orig
 vi config.toml
  [plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc.options]
     SystemdCgroup = true	# false 修改为 true
  [plugins."io.containerd.grpc.v1.cri"]
     # sandbox_image = "registry.k8s.io/pause:3.8"
     sandbox_image = "registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.8"
  [plugins."io.containerd.grpc.v1.cri".registry.mirrors]
   [plugins."io.containerd.grpc.v1.cri".registry.mirrors."docker.io"]
     endpoint = ["http://mirrors.ustc.edu.cn"]
   [plugins."io.containerd.grpc.v1.cri".registry.mirrors."*"]
     endpoint = ["http://hub-mirror.c.163.com"]

 systemctl restart containerd
 netstat -nlput | grep containerd

=== kubernetes ===
==== repo ====
 cat > /etc/yum.repos.d/kubernetes.repo << EOF
 [kubernetes]
 name=Kubernetes
 baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
 enabled=1
 gpgcheck=1
 repo_gpgcheck=1
 gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
 EOF

==== kubelet kubeadm kubectl ====
 # yum list kubelet --showduplicates
 
 yum install kubelet kubeadm kubectl
 systemctl enable kubelet
 systemctl status kubelet
 此时状态不正常，等到 init 或 join 后，状态正常。

==== master ====
===== INIT =====
安装 calico 网络插件需要 pod-network-cidr
 kubeadm init \
 --image-repository registry.aliyuncs.com/google_containers \
 --kubernetes-version=1.28.2 \
 --apiserver-advertise-address=192.168.0.249 \
 --service-cidr=10.1.0.0/16 \
 --pod-network-cidr=10.2.0.0/16
* apiserver-advertise-address: master 主机 IP 地址
* service-cidr: 内部 service 使用 IP 范围，不可与 pod 及 master 重复
* pod-network-cidr: k8s pod 节点之间网络通信使用 IP 范围

 <small><small>Your Kubernetes control-plane has initialized successfully!
 
 To start using your cluster, you need to run the following as a regular user:
 
   mkdir -p $HOME/.kube
   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
   sudo chown $(id -u):$(id -g) $HOME/.kube/config
 
 Alternatively, if you are the root user, you can run:
 
   export KUBECONFIG=/etc/kubernetes/admin.conf
 
 You should now deploy a pod network to the cluster.
 Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
   https://kubernetes.io/docs/concepts/cluster-administration/addons/
 
 Then you can join any number of worker nodes by running the following on each as root:
 
 kubeadm join 192.168.0.249:6443 --token z1q425.gy4kgpp491c8nkq2 --discovery-token-ca-cert-hash sha256:0b02fa4069856afb9d17dba76527b7e7c630d799cc3c00c3cc36c8beaec0128c </small></small>

===== calico =====
 wget https://raw.githubusercontent.com/projectcalico/calico/v3.25.0/manifests/calico.yaml
 kubectl apply -f calico.yaml
===== kube-flannel =====
 wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
 kubectl apply -f kube-flannel.yml

==== Node ====
 <small><small>kubeadm join 192.168.0.249:6443 --token z1q425.gy4kgpp491c8nkq2 --discovery-token-ca-cert-hash sha256:0b02fa4069856afb9d17dba76527b7e7c630d799cc3c00c3cc36c8beaec0128c</small></small>


[[分类:Develop]]
[[分类:Linux]]